
New at Scott · 23 October 2026
Felix Neureuther is ready. All that's missing is snow.
His parents already skied with Scott poles. Now their son heads into winter with the brand himself. The story behind it, and the kit he wears.
1/5Green grass
October, in a pine forest
Full kit. No snow.
The sun is low between the pines. Felix Neureuther stands in the tall grass, helmet on, goggles on the helmet, jacket zipped to the top. Skis in one hand, poles in the other.
That is how the first photos of his partnership with Scott were taken. The peaks were still green, the brand writes. Felix takes it in his stride.
“I'm ready. Now all that's missing is the snow.”
Felix Neureuther · Scott press release, 23 October 2026, translated from German
He is now with Scott for several years, on skis in winter and on the bike in summer. The brand announced it on 23 October, one day before the World Cup winter began in Sölden.

Sun Valley, Idaho, 1958
It all started with a pole
Before Scott made helmets, goggles and bikes, there was a single product. Ed Scott, an engineer and ski racer from Sun Valley, built a tapered ski pole from aluminium. That was the end of poles made of bamboo and steel. That is what the poster behind Felix says.
- 1958Ed Scott builds the first aluminium ski pole. The brand grows from it.
- His parentsRosi Mittermaier and Christian Neureuther ski with Scott poles.
- 2026Their son becomes a Scott ambassador.

The pole from the poster, made againScott Pole OriginFor its 65th birthday, Scott rebuilt the first pole as a special aluminium edition.View →“For me, Scott is the perfect match.”
Felix Neureuther · Scott press release, 23 October 2026, translated from German
That his parents already skied with the poles makes the partnership special for him, he says.
Felix's favourite set-up for winter
Head first
For winter 2026/27 Felix wears the Element Pro MIPS helmet, the Neo goggles and the Vertic GORE-TEX 3L jacket and trousers. Scott calls it his favourite set-up. Most of the technology sits on his head.

Tap a point
Neo goggles
1Lens
The freeform lens sits closer to your face, which gives you a wider view. Amplifier lens technology is meant to make contours in the snow clearer.
Neo goggles
2Face foam
Three layers of foam sit softly on your face. Inside, a NoFog coating is meant to keep the lens clear.
Neo goggles
3Strap
Extra wide with a silicone coating, so the goggles do not slip on the helmet, even on rough runs.
Element Pro MIPS helmet
4Vents
Active ventilation regulates the warmth under the helmet. A separate vent is meant to stop the goggles from fogging up.
Element Pro MIPS helmet
5MIPS
The yellow dot shows it: inside sits MIPS, a sliding layer for angled impacts. There is also a RECCO reflector built in.
Element Pro MIPS helmet
6Ear pads
Scott calls it 360° Pure Sound. The pads are meant to let sound through, so you hear what is going on around you.
Element Pro MIPS helmet
7Buckle
A magnetic Fidlock buckle. It opens and closes with gloves on, at the lift as well as on the summit.
Details from Scott
According to Scott, the helmet weighs 500 grams and the goggles 216 grams. Photo: Scott Sports / Julian Oswald


Vertic GORE-TEX 3L
For long days off-piste
The jacket and trousers are built for freeride: three-layer GORE-TEX, waterproof and breathable according to Scott, with a RECCO reflector in both. The jacket has underarm vents, a removable powder skirt and an inside pocket for your goggles with a wipe. The trousers have a high bib with braces, edge guards and an inside pocket with a loop for an avalanche transceiver.
Jacket in the photos: Cocoa Red and Portobello BeigeTrousers: Black and Cocoa Red
Editorial
Is it for you?
Strong at
- Freeride and long days off-piste: that is what the jacket and trousers are built for, with RECCO, vents and a powder skirt.
- Helmet and goggles for piste and off-piste.
Not the focus
- You mostly ski the piste with breaks in the hut. Then a lighter, cheaper jacket is often enough.
- You ski one or two weeks a year. For a few ski days, this is an expensive kit.
Our take: Höhenmeter editorial team, October 2026. Based on Scott's press release and the product descriptions at SportFits.

In summer
When the snow melts
In summer Felix rides for Scott, in the photo on an e-mountain bike. The two are already planning joint projects for the start of the bike season in spring, Scott writes. When it happens, the story continues here.
At SportFits you will mainly find Scott ski poles, helmets, goggles and clothing.
“I want to be outdoors, keep moving and always be able to rely on my equipment.”
Felix Neureuther · Scott press release, 23 October 2026, translated from German
Ready for the first snow?
Felix's set-up is available at SportFits. You will find sizes, colours and prices in the shop.
HeadHelmet Element Pro MipsMIPS, RECCO, magnetic buckle118.35€View →
EyesGoggle NeoFreeform lens, NoFog108.75€View →
TopJacket Vertic GTX 3LGORE-TEX 3L, powder skirt498.95€View →
BottomPants Vertic GTX 3LBib, braces, edge guards318.15€View →
Fast delivery to many European countries · 30-day returns · Trusted Shops buyer protection
Read on
More from the mountains
Sources
Where the details come from
Quotes and partnership: Scott press release of 23 October 2026, quotes translated from German. Photos: Scott Sports / Julian Oswald, media kit "Partnership Announcement Oktober 2026". History of the ski pole: Scott poster in the photo. Product details: Scott's descriptions on the SportFits product pages.
SportFits
outdoors looks good on you
The cool stuff from over 200 brands. From the dog walk to the summit.









