Völkl RTM 81

Whether for advanced or very good skiers - the RTM 81 is the one ski for all. 81 mm middle width is the perfect compromise in all conditions on all slopes. 3D-Ridge core, Full 3D sidewall with Extended Tip & Tail Rocker and the GripWalk- compatible WideRide XL binding ensure top performance. The 3D.glass construction produces noticeably more power transmission, higher torsional stiffness as well as improved edge grip and liveliness. A few facts about the ski Core: 3D.Ridge Core Binding system: iPT Wideride XL 12 TCX GW orange Coating: P-Tex 2100 Waist: 128_81_109 Rocker: XTD Tip & Tail Rocker Driver level Beginners Professional Terrain Runway Deep snow Terrain Short turn Long swings LengthRadiusTailoring 15613.3128-81-109 mm 16314.7128-81-109 mm 17016.3128-81-109 mm 17717.9128-81-109 mm 18219128-81-109 mm Technologies iPT Wideride XL 12 TCX GW orange: Marker and Völkl developed the iPT Wideride system with a 30% larger contact surface compared to a standard binding. In addition, the binding is mounted much closer to the edges of the ski. This ensures a more direct and continuous release of energy onto the edges. As a result, wider skis are more agile and at the same time have better control. They react more directly to the rider's impulses and translate the edge pressure from above into a precise and powerful skiing style Z value: 4.0 - 12.0 3D.Glass: Völkl's latest development 3D.Glass once again enables an improvement in the handling characteristics and stability of a ski, especially in difficult snow conditions. Compared to a classic glass construction, the three-dimensional and multi-folded fabric layers in the binding area provide increased edge grip and a more lively springback of the ski in curves. 3D.Ridge Core: A plywood combination of Full Sensor wood core and light plywood specially designed for 3D.ridge construction. 3D.Ridge: The wood core is raised in the middle of the ski and extremely flattened towards the sides. This results in an enormous reduction of weight and gyrating mass, while at the same time maintaining the stability of the ski. The 3D.Ridge technology stands for the most extreme and effective construction available at the moment. It has since become the trademark of VÖLKL lightweight construction. A characteristic feature is the raised centre bar, which flattens out to the maximum in front of and behind the binding towards the edge. This reduces the flywheel mass around the pivot point to a minimum and significantly increases the agility of the ski. At the same time, the center bar allows for an exact design of the hard curve, resulting in a 3D.RIDGE particularly harmonious flex curve of the ski. Despite the weight reduction, the 3D.Ridge design does not negatively affect the load and durability of the ski in any way. Powered by Steel: A steel layer in the ski provides very good durability, controlled flex and smooth skiing at faster speeds Base P-Tex 2100: Sintered, ultra-high molecular weight polyethylene base with high density, excellent wear resistance and very good gliding properties Full 3D.sidewall