Völkl Flair 81 Carbon

With 128_81_109 mm sidecut and 3D.ridge, the Flair 81 Carbon is THE all-mountain ski for advanced, very sporty female skiers who value excellent grip, smoothness and liveliness. The 3D.glass construction produces noticeably more power transmission, higher torsional stiffness as well as improved edge grip and driving stability. The WideRide XL binding system is naturally compatible with GripWalk soles. A few facts about the ski Core: 3D.Ridge Core Light Binding system: Wideride XL 11 TCX GW Lady Coating: P-Tex 2100 Waist: 128_81_109 Rocker: XTD Tip & Tail Rocker Driver level Beginners Professional Terrain Runway Deep snow Terrain Short turn Long swings LengthRadiusTailoring 14912.3128-81-109 mm 15613.3128-81-109 mm 16314.7128-81-109 mm 17016.3128-81-109 mm Technologies Wideride XL 11 TCX GW Lady: Marker and Völkl developed the iPT Wideride system with a 30% larger contact surface compared to a standard binding. In addition, the binding is mounted much closer to the edges of the ski. This ensures a more direct and continuous release of energy to the edges. This allows wider skis to be more agile while improving control. They react more directly to the rider's impulses and translate the edge pressure from above into a precise and powerful skiing style Z value: 3.0 - 11.0 3D.Glass: Völkl's latest development 3D.Glass once again enables an improvement in the handling characteristics and stability of a ski, especially in difficult snow conditions. Compared to a classic glass construction, the three-dimensional and multi-folded fabric layers in the binding area provide increased edge grip and a more lively springback of the ski in curves. Efficient Skiing: Less effort - more performance! It has always been our goal to create performance-oriented skis for demanding skiers of all ages, with which you can enjoy the slopes and slopes longer and more relaxed than ever before, thanks to less effort and somewhat more benign handling. So less energy expenditure with full performance! 3D.Ridge Core light: A plywood combination of Full Sensor wood core and extra light plywood specially designed for 3D.Ridge construction 3D.Ridge: The wood core is raised in the middle of the ski and extremely flattened towards the sides. This results in an enormous reduction of weight and gyrating mass, while at the same time maintaining the stability of the ski. The 3D.Ridge technology stands for the most extreme and effective construction available at the moment. It has since become the trademark of VÖLKL lightweight construction. A characteristic feature is the raised centre bar, which flattens out to the maximum in front of and behind the binding towards the edge. This reduces the flywheel mass around the pivot point to a minimum and significantly increases the agility of the ski. At the same time, the center bar allows for an exact design of the hard curve, resulting in a 3D.RIDGE particularly harmonious flex curve of the ski. Despite the weight reduction, the 3D.Ridge design does not negatively affect the load and durability of the ski in any way. Powered by Carbon: The carbon construction allows the optimal combination of low weight, best durability and very sporty skiing characteristics Full 3D.sidewall Base P-Tex 2100: Sintered, ultra-high molecular weight polyethylene coating with high density, excellent wear resistance and very good sliding properties